bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? c onverts plcc packaged ics to dip footprints. ? i deal for prototyping and testing/evaluation. ? a vailable with plcc sockets or plcc pads on top side. ? c onsult factory for panelized form or for mounting of consigned ics. general specifications ? a dapter body: fr-4, 0.062 [1.58] thick, with 1-oz. cu traces ? p ins: brass 360 1/2-hard per uns c36000, astm b16/b16m ? p in plating: sn/pb 93/7 is 200 [5.08] per astm b579-73 over 100 [2.54] ni per sae-ams-qq-n-290 with 10 [0.254] au per mil-g-45204 over 100 [2.54] ni per sae ams-qq-n-290 ? optional plcc surface mount socket : ul 94v-0 pps ? s ocket contacts: phosphor bronze, sn-plated ? c urrent rating: 1 amp ? o perating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. ? w ill plug into standard ic socket ? s ee table for pad layout when mounting plcc socket 18014 rev. ab series 652000 and 653000 plcc-to-dip adapter pins dim. a dim. b dim. c dim. d dim. w 0.003 [0.08] non-cumulative dim. x 0.003 [0.08] non-cumulative dim y 0.003 [0.08] dim. z 0.003 [0.08] pad size 28 1.400 [35.56] 1.300 [33.02] 0.705 [17.91] 0.703 [17.86] 0.300 [7.62] 0.300 [7.62] 0.449 [11.41] 0.449 [11.41] 0.024 x 0.076 [0.61 x 1.93] 32 1.600 [40.64] 1.500 [38.10] 0.705 [17.91] 0.805 [20.45] 0.400 [10.16] 0.300 [7.62] 0.549 [13.95] 0.448 [11.39] 0.024 x 0.076 [0.61 x 1.93] 44 2.200 [55.88] 2.100 [53.34] 0.910 [23.11] 0.910 [23.11] 0.500 [12.70] 0.500 [12.70] 0.670 [17.02] 0.670 [17.02] 0.026 x 0.076 [0.66 x 1.93] 68 3.400 [86.36] 3.300 [88.32] 1.220 [30.99] 1.220 [30.99] 0.800 [20.32] 0.800 [20.32] 0.945 [24.00] 0.945 [24.00] 0.026 x 0.076 [0.66 x 1.93] 84 4.200 [106.68] 4.100 [104.14 ] 1.420 [36.07] 1.421 [36.09] 1.000 [24.40] 1.147 [ 29.13 ] 1.147 [ 29.13 ] 1.147 [ 29.13 ] 0.026 x 0.080 [0.66 x 2.03] no. of pins 2 8, 32, 44, 68, 84 series 6 52000: without socket 6 53000: with socket ordering information xx - 65x000 - 1 x plating 0 = s n/pb 1 = a u solder tail pin customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified consult factory for other sizes and configurations
|
